Floors on balloons,
terraces and loggias are usually exposed to the extreme impact of weather
conditions, which have a decisive impact on changing their appearance and
functions. In addition to
resistance to temperature differences or mechanical loads, they must be
resistant to water. The damage
visible on the surface is usually accompanied by damage to the deeper layers,
even the interruption of the water-proof insulation.
The solution to these
problems is SikaBond®-T8, an unrivaled bonding and sealing material!
SikaBond®-T8 is a
single-component, ready-to-use flexible adhesive for watertight ceramic tile
floors. It's sealing and sticking
with one material. With
SikaBond®-T8, you get the most flexible adhesive that guarantees tile stability
and a watertight coating that protects the substrate against leaks.
Excellent for sealing
sensitive areas, ie corners, flashings, balustrades, etc. without the use of
corner tapes.
Permanently resistant to
water, frost and high temperature (underfloor heating).
Thanks to its
flexibility, SikaBond®-T8 is ideally suited for bonding tiles on deformable
substrates, eg osb panels, plasterboards, steel substrates and old tiles.
SIKA SikaBond-T8
The benefits of using
SikaBond®-T8
only one material for
bonding and sealing
it does not require
priming of the substrate
simple and quick use
glue with exceptional
adhesion to many materials
creates a flexible
water-proof insulation
deformable and resistant
to frost
single-component, no
mixing
flexible fixing of tiles
covers cracks and
scratches of the ground
evens out slight
unevenness in the ground
it suppresses the sound
of footsteps
SikaBond®-T8 can be used
on balconies, terraces
in the kitchen
in the bathroom
in the laundry room
in loggias
in other wet and damp rooms.
The SikaBond® -T8
application step by step
1. A dry and even substrate is required before applying
SikaBond® -T8
2. Clean the substrate
from loose compounds and dust off the surface
3. Smooth sheet metal
works should be degreased and primed with Sika®-Primer 3
4. Mark the top edge of
the plinth
5. To apply the angle
between the vertical and the level, apply Sikaflex®-11FC
6. Isolate with
SikaBond®-T8 material, vertical and level passage
7. Apply a smooth trowel
to the substrate
8. Insulation layer:
consumption 1kg / m2. The
insulation layer must have a uniform structure
9. After the material
has hardened (at least 20 h), apply the adhesive layer with a comb
10. Material
consumption: 1.5 kg
/ m2
11. Grouts are made of
Sikaflex®-11FC flexible polyurethane material
Trust us and enjoy your
dry and safe terrace!
