Thursday, January 10, 2019

Flat sheet on the facade of the house



The elevation decides not only about the aesthetics and style of the whole house, but above all about the comfort of building use, durability and tightness of the entire structure. In a newly built house, the possibilities of choosing the right finish for exterior walls suited to our tastes are almost limitless. Flat sheet metal is more and more often used.

Flat sheet on the facade of the house

There are many variants of finishing the facade of the house, although not all enjoy the same popularity. This is the unappreciated way to finish the facade with flat plate. It is a material successfully used for roofing - but it is rarely seen on elevations. In single-family houses flat plate is used rather on fragments of the facade, to emphasize architectural details. Although you can find houses with facades entirely finished with flat plate.

Types of sheet metal

The material from which the sheet is made affects the cost of the façade, its durability and, of course, appearance. Usually, galvanized steel sheets are laid on the elevations and covered with a protective coating (giving it a color) or zinc-titanium.Modern technologies have made flat sheet more durable and appear in attractive colors. It is usually sold in lengths of 2- 3 m or in rolls up to 16 m in length and 50 cm in width , while the height of the seam is usually 32 mm . You can also buy panels or coffers with latches on the edges of the standing seam. Flat sheet is usually available in shades of gray, graphite, dark shades of red, green and brown.

Steel plate. This is the most popular tin coating. Steel sheet itself is prone to rust, which is why it is protected with protective layers that increase its durability, it is determined even for 40-50 years (depending on the type of protective layer and sheet thickness). Such a flat plate usually has a thickness of 0.5- 0.7 mm and is usually galvanized on both sides. Additionally, it is protected by a plastic coating, e.g. polyurethane or polyvinyl. This solution allows to increase the sheet resistance to atmospheric factors and give it a nice look. Steel sheet is made of Aluzinc galvanized steel, i.e. an aluminum, zinc and silicon alloy. Aluzinc sheet is more resistant to corrosion than galvanized sheet, because it has self-healing properties, eg it can be vulcanised in places of scratches.

Zinc-titanium sheet. It is a plate, which is one hundred zinc (about 99%) and titanium (about 1%). The durability of the titanium sheet is evaluated for 100-120 years, with time covered with a protective layer - patina. There are natural or pre-patinated sheets on the market that give the metal sheet a characteristic noble appearance. 1 m² of zinc-titanium sheet weighs 4.5-5.8 kg , its thickness is 0.65- 0.8 m .

Installation of flat sheet on the facade

The flat plate is mounted to the system grid (wooden, steel, aluminum) attached to the insulated wall. The grate can be single, double or triple. It is selected for the type of cladding, building block and window and door openings - the designer makes the calculations with the producer and contractor.