Thursday, January 10, 2019

Blachodachówka - a popular cover for today's investor



Roofing sheet is one of the most popular roofing materials. Investors appreciate it, among others for an attractive tile form and a lower price.

The sheet metal is distinguished by a wave, whose height can be, for example, 20, 28, 39, 52, 55 mm . Suitable for roofing, with an inclination of up to 90 °. It works perfectly on roofs, with a lot of sunlight, because the colors of this cover do not fade for long. On the roofs of houses, situated among trees, and therefore exposed to scratches by falling branches or cones. It is better to choose a cover that is more resistant to damage. Contemporary roofing tiles are covered with protective coatings that protect them from the harmful effects of weathering, corrosion and scratches, which significantly prolongs their durability. They are sold in large sheets, so it's easier and faster to put them together. It is no longer a problem to make a roof with a complicated shape. Many manufacturers offer material preparation to size, which significantly reduces the generation of waste.

Steel roofing sheet

The durability of steel sheet coverings is set at 30-50 years, depending on the type of finish.

Finished with a coating.

They are made of sheet metal protected with protective layers that increase its durability. The most popular solution is roofing sheet, galvanized steel sheet, additionally coated with a layer of varnish, where the durability of the covering material is determined by its type and quantity (thickness of the lacquer layer on the baking sheet). The most common coatings are polyester, purex, pural - it is one of the most durable. They can be glossy or matte. Also made are steel sheet roof tiles, Aluzinc galvanized (aluminum, zinc and silicon alloy). Roofing sheets with a coating usually have a thickness of 0.4 to 1.25 mm and can be bought in sheets. They work best on roofs with large tracts.

With a layer of sprinkles.

Another type of finish is a mineral topping, made of fine-grained rock aggregate, covered with acrylic resin, with the addition of fungicides. Thanks to such a layer, the sheet well suppresses the sound of raindrops, does not heat up too much and is resistant to growing over with moss and algae. This type of cover is reminiscent of stone slate, wooden shingle or tile roof. Roofing sheet with sprinkles are in the form of panels with the width of one row of tiles - about 30 cm and length from about 1 to 4m.

Aluminum roof tiles

Roof tiles made of this metal are lighter than those made of steel. They are easy to process and resistant to corrosion. The aluminum is coated with a protective passivation layer, from the bottom with epoxy varnish, from the top with a colored polyester coating, resistant to UV radiation.

Roofing sheet - assembly rules

They are fastened to battens whose spacing should comply with the recommendations of the coating manufacturer. The sheets are mounted on the plant, covering the capillary grooves. For fixing, use screws with EPDM sealing caps. Panel tiles should be laid from the top of the roof, and subsequent rows should be inserted under the ones that have been laid. The vertical edges are connected with roofing nails and the joints should be sealed. A special type of panel roofing sheet is a model with a built-in support patch, it is mounted from the bottom of the roof.