Sunday, January 13, 2019

Time for changes: A new floor in the apartment. Specialists suggest how to properly choose and install floor panels



The floor is one of the basic and, at the same time, the most important elements of the interior design. If it is properly selected, it can enjoy the household for many years. An important role is played by its functional, but also aesthetic advantages. What are the aspects to consider when choosing floor panels? How to mount them? These questions are answered by RuckZuck specialists, presenting at the same time the latest collections of laminate floors: Master 4V, Impression and Freedom.

How to choose the right floor?

RuckZuck salons offer a wide range of floors, which are available as part of collections that differ in technical parameters and decors. Depending on your needs and expectations, you can choose from a rich color line, paying attention to properties such as plank dimensions, abrasion and usability class, type of joint or surface structure.

When choosing panels for the apartment, it is worth considering what visual effect we want to achieve. The floor can resemble rough, planed boards, have a matte or glossy surface, smooth or with clearly defined rings. The color of the boards is also important. Bright shades will favor optically enlarging and illuminating the interior. The dark ones will bring a more intimate, somewhat mysterious mood.

Depending on the room in which we intend to arrange the panels, the utility class and abrasiveness of the boards should be adapted to it. In order not to worry about the resistance of the floor to damage, it is worth purchasing products with abrasion class from AC3 and above. An important parameter is also the thickness of the panels, which ranges from 6 mm to 12 mm .Remember that the thicker the boards, the more stable and less susceptible to any kind of deformation.

The last step is to properly measure the room where the panels will be. Even the most accurate measurement does not guarantee the use of each board in 100 percent. Approximately 10 percent should be added to the estimated area. Thanks to the stock, we can be sure that we will not lack material for any niche or deviate from the typical shape of the floor.

Self-assembly of the floor

Floor panels offered at RuckZuck points can be successfully assembled by themselves. However, there are a few basic rules to keep in mind:

· After the purchase, you have to wait 48 hours until the boards acclimatize;

· Panels can only be laid on dry and even surface after cleaning it;

· Boards should be removed from the packaging immediately before assembly;

· When laying the floor it is worth checking the panel condition and possible damage on an ongoing basis.

For proper assembly, in addition to the panels purchased, you also need: 2 mm PE vapor barrier foil , soundproofing primer, spacers, rubber hammer, handball or electric jigsaw. With these items you can proceed to action. Here is a list of steps to be taken:

1. preparation of the substrate - put a vapor barrier foil and a soundproofing primer on the floor surface,

2. laying panels - place the first board along the wall in the corner of the room. If the last stave is too long, cut it with a sharp saw or an electric jigsaw,

3. dilatation - leave the expansion joint with a width of 1-2 cm at the walls and in the doorways of the rooms. Use plastic or wooden wedges to mark it,

4. clip panels - planks with longer edges, with special projections

and grooves profiled so that they form a hook,

5. matching the panels - better adhesion of the boards will be ensured by gently hammering the edges with a hammer. However, it is not allowed to hit the panel, only the brick placed against it,

6. last fixes - when the floor is laid, leave it for 24 hours, then remove the spacers and finish the room with floor strips.

New panel collections

From February 1 this year. three new collections of floor panels are available in RuckZuck stores: Master 4V, Impression and Freedom. Each of them includes eight original decors that will work both in modern interiors and those furnished in a classic style.

Master 4V is a line created for demanding clients who value the solidity of the panels, at the same time placing a strong emphasis on their aesthetics. It is a combination of traditional, oak decors

with a modernist form, making it more attractive to any room. What's more, these boards optically enlarge the arranged space.Their edges are covered with a special composition of Isowaxx waxes, which protects them against moisture penetration and deformation. Panels from the master series are also a guarantee of many years of durability and timeless design.

Impression is a collection dedicated to people for whom the most important are quality, uniqueness of designs and comfort of use. The anti-static surface, which reduces the deposition of dust on the boards, high abrasion resistance and rich coloring of decors, will enable the arrangement of a modern interior according to an individual, even completely non-standard vision. The synchronous structure, with a three-dimensional surface texture, reflects the natural features of the grain and fibers, makes the floor look like real wood.

Freedom are panels especially recommended to perfectionists. In addition to aesthetic values, they have numerous functional advantages. Boards cover a mixture of waxes, which protects them from the ingress of moisture and, as a result, from warping.The anti-static coating in turn makes it easier to maintain long-lasting cleanliness and prevents electrifying the floor. They are also characterized by higher than standard thickness and abrasion class AC4, thanks to which they remain durable and resistant to mechanical damage.