The
construction of walls in the H + H system is made of very good quality
material, which is H + H cellular concrete, which is characterized by extremely
favorable thermal insulation. Thanks
to this property, it is an excellent material for building single-layer walls. The
exceptionally favorable (low) value of the thermal conductivity coefficient λ of
H + H cellular concrete blocks allows to obtain walls with a low heat transfer
coefficient, and for the investor it means less energy used to heat the
house.Thanks to a reasonable compromise between strength and thermal
insulation, cellular concrete is one of the few building materials that allows
the construction of single-layer walls without the need for thermal insulation.
The
construction of walls in the H + H system is made of very good quality
material, which is H + H cellular concrete, which is characterized by extremely
favorable thermal insulation. Thanks
to this property, it is an excellent material for building single-layer walls. The
exceptionally favorable (low) value of the thermal conductivity coefficient λ of H
+ H cellular concrete blocksallows
to obtain walls with a low heat transfer coefficient, and for the investor it
means less energy used to heat the house.Thanks to a reasonable compromise
between strength and thermal insulation, cellular concrete is one of the few
building materials that allows the construction of single-layer walls without
the need for insulation.
Build
heat and energy-saving
- H
+ H Thermostein
More
and more often talk about passive, energy-saving or low-energy construction. This
is due to the fact that in 2009 Poland
implemented the provisions of Directive 2002/91 / EC of December 16, 2002 on
the energy performance of buildings. In
fact, however, it is not legal requirements that determine the growing interest
in energy-saving construction. There
are many reasons.Finance is certainly one of the priority factors for the
popularity of energy-efficient houses. Less
energy loss this
is a reduction of the household budget burden on thermal and electric energy. Thinking
people know that using the right materials and technologies in the construction
industry results in a longer life for the building.
The
improvement of the insulation and heating standard improves the microclimate of
the home environment, which has a positive effect on the health of the
household. Simply
put, an energy-saving house is one that consumes 2-3 times less energy for
heating than a typical building. Demand
for heat in standard homes that meet modern standards expressed by the
so-called the
coefficient of seasonal heat demand is EA
on average 120 kWh / m², and when it comes to energy-saving houses, it is
already 15 - 70 kWh / m². Passive
houses deserve special attention. Passive
house is a building whose energy demand drops to the level of 15 kWh of energy
per 1
sq m of
usable space per year.
The
first question an investor puts when choosing a project concerns the choice of
wall material. In
order to obtain a sufficiently low value of the heat transfer coefficient of
external partitions required in energy-saving or passive houses, H + H Polska
offers cellular concrete, which is a material with the best thermal insulation
parameters.
In
2010, H + H introduced into the market of building materials, cellular concrete
blocks with an integrated thermal insulation layer under the name H + H
Thermostein.
H
+ H Thermostein what
is that?
These
are blocks that allow walls to be erected with a coefficient of U = 0.16W / m²K
without the need for an additional layer of thermal insulation, which raises
the cost of making the masonry. The
value of the coefficient U = 0,16W / m2K is unattainable by other producers of
wall materials on
the Polish market. H
+ H Thermostein is the only block on the Polish market with an integrated
thermal insulation layer. The
wall made of this material meets all the requirements for strength, fire
resistance and thermal insulation for building partitions.
The
advantages of H + H Thermostein blocks
1.
Excellent thermal insulation parameters:
•
the lowest value of the U coefficient on the market: 0.16 W / m2K,
•
approximation to passivity standards,
•
the highest thermal insulation from built walls from individual elements of this
thickness.
2. Ease and speed of
building walls:
• making 1 m2 of wall requires about 1 hour; it is 4 times shorter time than with
the traditional wall + insulation solution,
• no need for gluing and
filing the insulation layer,
• minimization of
executive errors by using three
layers in one element,
• easy installation of,
for example, electrical installations in concealed grooves in both the inner
and outer sides of the wall.
3. Very good technical
parameters of the wall:
• favorable sound
insulation,
• the highest class of
dimension accuracy,
• high resistance to
mechanical damage - the material susceptible to
damage is hidden inside the wall,
• thermal insulation is
protected against fire, rodents, atmospheric conditions, mechanical damage
during construction and during
the operation of the building.
4. Possibility of any
shaping of the façade's color (as opposed to a diaphragm wall with a clinker
shield).
H + H Thermostein block
with integrated thermal insulation
You can not build more
rationally!
